Chuyển đến nội dung chính

Máy Tính Tỷ Số Bánh Răng

Khoa học & Kỹ thuật

Số răng/tốc độ/mô-men xoắn + nhiều cấp

Xem nhanh kết quả

Gear Ratio Calculator: Teeth/speed/torque + multi-stage. Gear Ratio Calculator uses standard science & engineering formulas to compute accurate results instantly.

Tỷ số truyền tổng i
3.000 : 1
Speed reduction — output torque × 3.00 (before efficiency loss)
Tỷ số truyền động cấp đơn3.000
Tốc độ quay đầu ra n₂483.33 rpm
Vòng quay/giây đầu ra8.056 r/s

Bước tính

  1. 1Tỷ số truyền cấp đơn i = z₂/z₁ = 60/20 = 3.000
  2. 2i > 1 = speed reduction (torque × 3.00, ignoring efficiency); i < 1 = speed increase
  3. 3Tốc độ quay đầu ra n₂ = n₁ / i = 1450 / 3.000 = 483.33 rpm

Tỷ số truyền ứng dụng phổ biến

Bicycle前 42T / 后 11-34T → i = 0.32-3.8
Car 1st geari ≈ 3.5-4.5,低速大扭矩
Car 5th (overdrive)i ≈ 0.7-0.8,高速省油
Gearmotori = 10-100 单级蜗轮/行星
Watch movementi = 60 严格定比
Wind turbinei ≈ 90-100(增速箱)
Bảo toàn công suất (trừ hiệu suất): Tốc độ quay và mô-men xoắn thay đổi ngược nhau thông qua tỷ số truyền. Tham khảo hiệu suất cấp đơn: Bánh răng trụ 98-99%, Bánh vít 70-90% (tự khóa khi hiệu suất dưới khoảng 50%), Dây đai/xích 95-98%. Tỷ số truyền tổng của hộp số giảm tốc nhiều cấp bằng tích các cấp; Bánh đai thay số răng bằng đường kính vòng tròn — i = D₂/D₁. Số răng tối thiểu đề xuất của bánh răng góc áp lực tiêu chuẩn 20° là z ≥ 17, nếu không sẽ xảy ra cắt rễ.

Công cụ này có hữu ích cho bạn không?

Hướng dẫn sử dụng

  1. Enter known quantities: fill values and confirm units in the Gear Ratio Calculator.
  2. Instant solution: unknowns solve live with the formula shown transparently.
  3. Use constant/material tables: standard physical constants and material data are listed on this page.
  4. Compare conditions: change inputs to compare scenarios.

Điểm chính

  • Gear Ratio Calculator is a free online science & engineering tool — open and use, no sign-up.
  • All calculations run locally in your browser; your data never leaves the device.
  • Key capability: Teeth/speed/torque + multi-stage.
  • Results come with formulas and reference tables so you can verify every number.

Công thức và nguyên lý hoạt động

Gear Ratio Calculator formula

Gear Ratio Calculator uses standard science & engineering formulas to compute accurate results instantly.

Câu hỏi thường gặp

How do I use the Gear Ratio Calculator?
Open the page and fill in the input fields — results update automatically. Teeth/speed/torque + multi-stage.
Are the results accurate?
Yes. Standard formulas and conversion factors are used and verified.
Is it free? Do I need to sign up?
Completely free. No registration, login or download required.
Does it work on mobile?
Yes. The responsive design works on phones, tablets and desktops.
Is my data saved?
No. Everything runs locally in your browser.

Công cụ liên quan

Hướng dẫn liên quan

Nguồn và cập nhật

Based on CODATA recommended constants and standard physics formulas. Last updated: 2025-07

Cập nhật gần nhất:

Công thức và nội dung trên trang này đã được đội ngũ YiJianSuan kiểm tra lại, chỉ dùng để tham khảo học tập, các nghiệp vụ thực tế vui lòng tuân theo thông báo chính thức.

Nội dung được đội ngũ biên tập YiJianSuan duy trì và kiểm tra lại định kỳ, quy trình cập nhật và kiểm duyệt xem tạiQuy định biên tập.

Trích dẫn trang này: YiJianSuan. Máy Tính Tỷ Số Bánh Răng[EB/OL]. https://www.yijiansuan.com/vi/c/science/gear-ratio

Kết quả do công cụ này cung cấp chỉ mang tính tham khảo, không cấu thành bất kỳ lời khuyên chuyên nghiệp nào, vui lòng dựa trên kết quả tính toán chính thức.