Máy tính trọng lượng thép
Khoa học & Kỹ thuậtThanh tròn, ống và tấm trên mỗi mét
Steel Weight Calculator: Round bar, pipe and plate per meter. Steel Weight Calculator uses standard science & engineering formulas to compute accurate results instantly.
How it works
- 1Per meter = 0.00617 × 12² = 0.888 kg/m
- 2Total = 0.888 × 1 m = 0.888 kg
- 3Coefficients from the 7.85 g/cm³ industry shorthand
Industry shorthand formulas (density 7.85 g/cm³): round bar W = 0.00617 × d²; pipe W = 0.02466 × wall × (OD − wall); plate W = 7.85 × thickness(mm) × width(m) per meter of length. Example: Φ12 rebar ≈ 0.888 kg/m; Φ159×5 pipe ≈ 18.99 kg/m.
Galvanized steel multiplies the result by ~1.06; stainless steel (density ≈ 7.93) is slightly heavier. These are theoretical values for estimation — use the weighed weight for settlement.
Rebar trade convention: keep 3 decimals for Φ12 and below and Φ28 and above, 2 decimals for Φ14-Φ25 (e.g. 8 → 0.395 kg/m, 25 → 3.85 kg/m).
Công cụ này có hữu ích cho bạn không?
Hướng dẫn sử dụng
- Enter known quantities: fill values and confirm units in the Steel Weight Calculator.
- Instant solution: unknowns solve live with the formula shown transparently.
- Use constant/material tables: standard physical constants and material data are listed on this page.
- Compare conditions: change inputs to compare scenarios.
Điểm chính
- Steel Weight Calculator is a free online science & engineering tool — open and use, no sign-up.
- All calculations run locally in your browser; your data never leaves the device.
- Key capability: Round bar, pipe and plate per meter.
- Results come with formulas and reference tables so you can verify every number.
Công thức và nguyên lý hoạt động
Steel Weight Calculator formula
Câu hỏi thường gặp
How do I use the Steel Weight Calculator?
Are the results accurate?
Is it free? Do I need to sign up?
Does it work on mobile?
Is my data saved?
Công cụ liên quan
Máy tính hệ số U tường
điện trở nhiệt lớp GB 50176Máy tính Delta-V tên lửa
phương trình TsiolkovskyTrình lập kế hoạch khí lặn
SAC × hệ số độ sâu → thời gian ở dưới nướcMáy tính định luật Ohm
V=IR — giải hai trong số điện áp, dòng điện, điện trởMáy tính công suất điện
P=VI, tiêu thụ năng lượng và chi phí điệnMáy tính điện trở nối tiếp & song song
So sánh điện trở tương đươngMáy tính dung tích động cơ
Đường kính xi lanh × hành trình piston × số xi lanh, cc/lítCông cụ ước tính chi phí cải tạo nhà cửa
Ước tính gói đầy đủ/nửa gói theo diện tích sànHướng dẫn liên quan
Nguồn và cập nhật
Based on CODATA recommended constants and standard physics formulas. Last updated: 2025-07
Cập nhật gần nhất:
Công thức và nội dung trên trang này đã được đội ngũ YiJianSuan kiểm tra lại, chỉ dùng để tham khảo học tập, các nghiệp vụ thực tế vui lòng tuân theo thông báo chính thức.
Nội dung được đội ngũ biên tập YiJianSuan duy trì và kiểm tra lại định kỳ, quy trình cập nhật và kiểm duyệt xem tạiQuy định biên tập.
Trích dẫn trang này: YiJianSuan. Máy tính trọng lượng thép[EB/OL]. https://www.yijiansuan.com/vi/c/science/steel-weight
Kết quả do công cụ này cung cấp chỉ mang tính tham khảo, không cấu thành bất kỳ lời khuyên chuyên nghiệp nào, vui lòng dựa trên kết quả tính toán chính thức.