Calcolatrice Peso Acciaio
Scienza e IngegneriaBarra tonda, tubo e piastra per metro
Steel Weight Calculator: Round bar, pipe and plate per meter. Steel Weight Calculator uses standard science & engineering formulas to compute accurate results instantly.
How it works
- 1Per meter = 0.00617 × 12² = 0.888 kg/m
- 2Total = 0.888 × 1 m = 0.888 kg
- 3Coefficients from the 7.85 g/cm³ industry shorthand
Industry shorthand formulas (density 7.85 g/cm³): round bar W = 0.00617 × d²; pipe W = 0.02466 × wall × (OD − wall); plate W = 7.85 × thickness(mm) × width(m) per meter of length. Example: Φ12 rebar ≈ 0.888 kg/m; Φ159×5 pipe ≈ 18.99 kg/m.
Galvanized steel multiplies the result by ~1.06; stainless steel (density ≈ 7.93) is slightly heavier. These are theoretical values for estimation — use the weighed weight for settlement.
Rebar trade convention: keep 3 decimals for Φ12 and below and Φ28 and above, 2 decimals for Φ14-Φ25 (e.g. 8 → 0.395 kg/m, 25 → 3.85 kg/m).
Questo strumento ti è stato utile?
Come usare
- Enter known quantities: fill values and confirm units in the Steel Weight Calculator.
- Instant solution: unknowns solve live with the formula shown transparently.
- Use constant/material tables: standard physical constants and material data are listed on this page.
- Compare conditions: change inputs to compare scenarios.
Punti chiave
- Steel Weight Calculator is a free online science & engineering tool — open and use, no sign-up.
- All calculations run locally in your browser; your data never leaves the device.
- Key capability: Round bar, pipe and plate per meter.
- Results come with formulas and reference tables so you can verify every number.
Principi e formule
Steel Weight Calculator formula
Domande frequenti
How do I use the Steel Weight Calculator?
Are the results accurate?
Is it free? Do I need to sign up?
Does it work on mobile?
Is my data saved?
Strumenti correlati
Calcolatrice Valore U Parete
Resistenza termica stratificata GB 50176Calcolatrice Delta-V Razzo
Equazione di TsiolkovskyPianificatore Gas Immersione Subacquea
SAC × fattore profondità → tempo fondoCalcolatrice Legge di Ohm
V=IR — risolvi due valori tra tensione, corrente e resistenzaCalcolatrice Potenza Elettrica
P=VI, consumo energetico e costo elettricitàCalcolatrice Resistori Serie & Parallelo
Confronto resistenza equivalenteCalcolatrice Cilindrata Motore
Alesaggio × corsa × numero cilindri, cc/litriStimatore Costi Ristrutturazione
Stima pacchetto completo/parziale per superficie pavimentoGuide correlate
Fonti e aggiornamenti
Based on CODATA recommended constants and standard physics formulas. Last updated: 2025-07
Ultimo aggiornamento:
Le formule e i contenuti di questa pagina sono stati verificati dal team di YiJianSuan. Sono solo per riferimento di studio: per le operazioni effettive, si prega di attenersi alle indicazioni ufficiali.
I contenuti sono mantenuti e periodicamente verificati dal team editoriale di YiJianSuan. Il processo di aggiornamento e verifica è disponibile aNorme editoriali.
Cita questa pagina: YiJianSuan. Calcolatrice Peso Acciaio[EB/OL]. https://www.yijiansuan.com/it/c/science/steel-weight
I risultati forniti da questo strumento sono solo per riferimento e non costituiscono alcun consiglio professionale: si prega di attenersi ai calcoli ufficiali.