稀釋濃度計算機
科學與工程套用C1V1=C2V2公式計算儲備液體積、最終濃度或體積
Dilution Calculator: C1V1 = C2V2 for stock volume, final concentration or volume. Stock volume V₁ = C₂V₂ ÷ C₁.
稀釋後總體積 V₂
126.67
Add solvent: 26.67 (same unit as volumes)
計算過程(C₁V₁ = C₂V₂)
- 1V₂ = C₁V₁ ÷ C₂ = 95 × 100 ÷ 75 = 126.67
- 2溶劑 = V₂ − V₁ = 126.67 − 100.00 = 26.67
- 3Dilution factor = C₁/C₂ = 1.27×
常見稀釋參考
| 場景 | 配比 | 說明 |
|---|---|---|
| 醫用酒精 | 95% → 75% | 75% 殺菌效果最佳 |
| 84 消毒劑 | 1:100 (5%→0.05%) | 物體表面消毒 |
| 傷口消毒 | — | 不可用 84/酒精直接消毒傷口 |
| 實驗室梯度稀釋 | 1:10 each step | 每步 10 倍,對數遞減 |
| 農藥稀釋 | 按說明書(如 1:500) | 嚴禁隨意加濃 |
💡 C₁V₁ = C₂V₂ conserves solute amount. Units of C must match on both sides (both % or both mol/L), same for V. For serial dilutions, multiply each step's factor. Alcohol dilution releases heat — add alcohol TO water, never the reverse, and volumes shrink slightly on mixing (contraction).
這個工具對你有幫助嗎?
怎麼用
- Enter known quantities: fill values and confirm units in the Dilution Calculator.
- Instant solution: unknowns solve live with the formula shown transparently.
- Use constant/material tables: standard physical constants and material data are listed on this page.
- Compare conditions: change inputs to compare scenarios.
核心要點
- Dilution Calculator is a free online science & engineering tool — open and use, no sign-up.
- All calculations run locally in your browser; your data never leaves the device.
- Key capability: C1V1 = C2V2 for stock volume, final concentration or volume.
- Results come with formulas and reference tables so you can verify every number.
原理與公式
Dilution law
C₁V₁ = C₂V₂ (solute is conserved)
常見問題
How do I use the Dilution Calculator?
Are the results accurate?
Is it free? Do I need to sign up?
Does it work on mobile?
Is my data saved?
相關工具
相關指南
來源與更新
Based on CODATA recommended constants and standard physics formulas. Last updated: 2025-07
最近更新:
本頁公式與內容經YiJianSuan團隊覆核,僅供學習參考,實際業務請以官方口徑為準。
內容由YiJianSuan編輯團隊維護並定期覆核,更新與審核流程詳見編輯規範.
引用本頁: YiJianSuan. 稀釋濃度計算機[EB/OL]. https://www.yijiansuan.com/zh-TW/c/science/dilution
本工具提供的結果僅供參考,不構成任何專業建議,請以官方核算為準。