5 chi (Chinese feet) to meters
5 chi (Chinese feet) equals 1.66667 meters. Conversion formula, quick reference table and FAQs for 尺 to m.
Calculation：5 × 0.333333 = 1.66667
Convert 尺 to m in three steps
- 1. Take the conversion factor: 1 尺 = 0.333333 m.
- 2. Multiply your value by the factor: 5 × 0.333333.
- 3. Read the result: 5 尺 = 1.66667 m, then round to your needed precision.
Conversion formula: 尺 to m
Reverse: 1 m = 3 尺 · see m-to-chi
尺 → m quick reference
尺 to m: common values at a glance
- · 1 尺 = 0.333333 m.
- · 2 尺 = 0.666667 m.
- · 10 尺 = 3.33333 m.
- · 20 尺 = 6.66667 m.
- · 25 尺 = 8.33333 m.
When do you need 尺 → m?
Height in feet, home measuring, running distances and overseas furniture sizes are the top use cases for centimeter-foot lookups. When mixing imperial and metric, convert to meters first. For example: 180 cm is 5 ft 11 in on a US form; a 32-inch suitcase is about 81 cm diagonally, and cabin bags must stay under 20 in (about 51 cm).
Where do 尺 and m come from?
Metric is anchored to the meter (defined via the speed of light since 1983); imperial is anchored to the foot, with 12 inches per foot and 1,760 yards per mile. The 1959 international agreement fixed 1 yd = 0.9144 m — the bridge between both systems.
FAQs
▸How many meters is 5 chi (Chinese feet)?
5 chi (Chinese feet) equals 1.66667 meters. Calculated as 5 × 0.333333 = 1.66667.
▸What is the formula to convert chi (Chinese feet) to meters?
1 尺 = 0.333333 m, so m = 尺 × 0.333333
▸Is there a quick way to estimate 尺 to m?
1 ft ≈ 30 cm and 1 mile ≈ 1.6 km. For cm to ft, dividing by 30 gives a fast estimate.
▸Where can I convert other values?
Open the full chi (Chinese feet) converter and enter any value: the tool supports bidirectional conversion between 尺 and m with all related units.
▸Why does the result contain decimals? How is rounding handled?
Because 尺 and m belong to different unit systems, the ratio is rarely a round number — results are shown to 6 significant figures and rounded for readability. For engineering or medical use, keep at least 2 decimal places and verify with the tool above.
▸Where do the 尺 and m definitions come from?
Both units trace back to international standard definitions — imperial units were fixed against metric by the 1959 international yard-and-pound agreement, and metric units are maintained by the BIPM. The factors used on this page match those standards.
▸How do I convert m back to 尺?
Use the inverse operation: for linear conversions divide by the factor instead of multiplying (or visit the reverse page); for temperature pairs, apply the inverse formula shown in the formula section.