آلة حاسبة حجم مثقاب الخيط
أدوات المطورينالاسمي مطروحًا منه الخطوة حسب المادة
Tapping Drill Size Calculator: Nominal minus pitch by material. Tapping Drill Size Calculator uses standard developer formulas to compute accurate results instantly.
How it works
- 1Hole = 10 − 1.5 = 8.5 mm (ductile rule)
- 2Nearest standard drill: 8.5 mm (0.1 step, round up)
- 3Blind hole depth = thread depth + 0.7 × 10 (for the tap lead)
Coarse pitch reference (M×P): M3×0.5, M4×0.7, M5×0.8, M6×1.0, M8×1.25, M10×1.5, M12×1.75, M14/M16×2.0, M18/M20×2.5. Fine pitches follow the thread spec (e.g. M8×1, M10×1.25).
A hole too small overloads the tap (breaking it); too large leaves shallow threads. For stainless steel take the hole 0.05-0.1 mm larger and use spiral-point or spiral-flute taps with cutting fluid at low speed.
The theoretical minor diameter is d − 1.0825P; the empirical rules above aim for ~70% thread engagement, the strength/torque sweet spot. Verify finished threads with go/no-go gauges.
هل هذه الأداة مفيدة لك؟
كيفية الاستخدام
- Paste or type content: drop code/text into the Tapping Drill Size Calculator or fill the parameters.
- Choose mode/options: switch format, rules or processing as needed.
- Live output: results appear instantly — nothing is submitted, data stays in your browser.
- One-click copy: copy the output straight into your development environment.
النقاط الأساسية
- Tapping Drill Size Calculator is a free online developer tool — open and use, no sign-up.
- All calculations run locally in your browser; your data never leaves the device.
- Key capability: Nominal minus pitch by material.
- Results come with formulas and reference tables so you can verify every number.
المبادئ والمعادلات
Tapping Drill Size Calculator formula
الأسئلة الشائعة
How do I use the Tapping Drill Size Calculator?
Are the results accurate?
Is it free? Do I need to sign up?
Does it work on mobile?
Is my data saved?
الأدوات ذات الصلة
آلة حاسبة مبرد CPU
هامش TDP إلى فئة الهواء/المبرد المائي AIOمنسق IPv6
التوسيع والضغط حسب RFC 5952محول كابو الجيتار
تسلسل النغمات · تحويل نصف نغمة لكل وترمحول القواعد للمطورين
تحويل دفعاتي بين الأنظمة الثنائية والثمانية والعشرية والستة عشريةمحول رموز الألوان
HEX و RGB و HSL و CMYKمنسق JSON
تجميل وتصغير والتحقق من صحة JSONمشفر / مفكك Base64
تشفير وفك تشفير نصوص Base64مشفر / مفكك URL
عمليات encodeURI و decodeURI عبر الإنترنتأدلة ذات صلة
المصدر والتحديثات
Based on RFC 4648, ECMA-262 and related specifications. Last updated: 2025-07
آخر تحديث:
تم مراجعة المعادلات والمحتويات في هذه الصفحة من قبل فريق YiJianSuan، وهي للمرجع التعليمي فقط. يرجى الاعتماد على المصادر الرسمية في العمليات الفعلية.
يتم صيانة المحتوى ومراجعته بشكل دوري من قبل فريق التحرير في YiJianSuan، ويمكن الاطلاع على عمليات التحديث والمراجعة فيالسياسات التحريرية.
استشهد بهذه الصفحة: YiJianSuan. آلة حاسبة حجم مثقاب الخيط[EB/OL]. https://www.yijiansuan.com/ar/c/dev/drill-size
النتائج التي يقدمها هذا الأداة للمرجع فقط ولا تشكل أي نصيحة مهنية، يرجى الاعتماد على الحسابات الرسمية.